![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
|
Why You Should Leave Double Glazed Window Repair to the Experts If your double-glazed windows are difficult to open or have sagged, it's usually best to have the problem fixed by an expert. A professional will also be in a position to provide you with a guarantee for their work that may not be available in the event that you attempt to repair it yourself. If you're tackling the job yourself, begin by removing the beads that separate. The lower sash should be pulled towards you and then remove any cords or chain. Glass that is damaged While double-glazed windows are less resistant to damage, frames and seals need to be maintained. Repair any small cracks, chips or dents that might appear on your window. They can weaken its overall structure. Double-glazed windows are an intricate system that consists of insulated glass, window frames and a plastic inter-lay. Repairs should be left to professionals. Cracks in your windows can be caused by a temperature shift, but they can also be the result of a leaky seal, or improper installation. You might be able to repair minor cracks using high-quality tape, however, more severe cracks will require to be replaced completely. If you have a cracked window, first, clean over and around the crack with water and soap to eliminate any dirt that might hinder the repair process. Mix your epoxy according to the directions of the manufacturer and apply it to the crack, smoothing it out with a putty knife. Allow it to dry completely before opening your window. Misting is a typical issue that can occur when the seals between the window panes fail. This can be a serious issue for homeowners because it can affect the thermal efficiency of their home and can cause condensation and mould. Moisture between your windows may cause wood molding to rot, rust or even leave black staining. Inhaling moisture spores could cause irritation to your respiratory tract. The most common indications of a damaged window seal are fogging or condensation that can't be wiped away from either side of the window. This is usually an indication of a failing edge seal that is able to secure each glass pane. If this persists and the panes eventually break, they could break.
A professional will drill holes into your double-glazed window to allow the moisture trapped to escape. Once the moisture has been eliminated, an anti-fog will be applied to the window to stop condensation from returning. Condensation Condensation on double-glazed windows is often the first sign of a failing seal. Condensation that is visible indicates that the glass panes hold the water vapour from the air. This excess moisture can cause dampness in your home and on furniture, carpets and walls. It can also be dangerous to your health. The good part is that there are numerous ways to reduce visible condensation. You can lower humidity, encourage air flow, and even use trickle vents on your windows to let out moisture. A failure to maintain your window and frame properly is another common cause of condensation. This means cleaning them regularly and making sure that the locking mechanisms and handles are free of dirt and lubricating them if they are stiff. It is also essential to get a double-glazed window that is of top quality installed by a reputable business. This will avoid any future seal issues and make sure that your windows are guaranteed for 15-20 years, giving you peace of mind knowing that your investment in a quality double-glazed windows is protected. The presence of moisture between your window panes can be an indication of a damaged seal, and should be addressed by an expert as soon as it is possible. If the seal is defective, it can lead to damp and mould in your home. This can also affect the insulation of your double-glazed windows. In extreme instances the window may have to be replaced. However, a professional could replace the window and allow you to keep the frames you have previously used. Condensation on the outside of your window is normal and it is a sign that your double glazing is doing its job! This moisture will evaporate when the sun warms the glass. There are a variety of cleaning products that can be used to remove the build-up quickly and easily if you are concerned about its appearance. You can also open your windows for more airflow and to stop the buildup from recurring. Foggy Glass Foggy windows are one of the most frequent issues with double glazing. It is caused by a damaged seal. This is known as a "sealed unit failure and a replacement window is required to resolve the issue. The seal between the glass panes traps air creating an insulating gap which assists in keeping hot and cold air in the room and stop moisture from entering the home. As the seal gets older, it will weaken, leading to condensation between the glass panes. In some cases, the seal may be replaced. It's important to contact the company you purchased your double glazing from when you discover any issue. The best method to do this is in writing, either via email or letter rather than via text or phone. This ensures your complaint is recorded and covered by any guarantee or warranty you might have. Before replacing your windows, you can try several different options to determine if the issue is due to water between the glass. Use a dehumidifier to remove moisture from the room where windows are situated. This will eliminate some excess moisture however it won't solve the issue since the humidity will enter the sealed unit and cause future condensation and fogginess. Another option is to drill the windows and then plug them with a spout which will create a new seal. This will solve the problem for a short time, but it's not a long-term fix and could cause other issues, such as drafts or leaks in your home. In the majority of instances replacing your double-glazed windows is the best choice. A professional can ensure a quality installation that will last for years and reduce your energy usage. It's also the best option to ensure that your windows provide a high degree of insulation as well as protection from harmful UV radiation, which can cause damage to carpets, fabrics, paintings and furniture. This is particularly important when you live in a sunny region. Misted Glass Condensation between the two panes glass is usually the reason for fog or misty double-glazed windows. In order to make sure that your windows are operating properly, it is important to get them cleaned and repaired regularly. When the seals between the panes break down, they can allow air to pass through which can reduce the insulating properties of your windows and can result in higher energy costs. Condensation on double-glazed windows not a good thing, but it is easily fixed with a bit of attention. Condensation occurs by warm air touching an unfrozen surface and then submerged below the water vapour condensation point. This happens naturally in your home. The reason this happens in double-glazed windows is that the windows are well-insulated and the air is warmer than outside. The causes of water leaking into your windows are numerous and varied. These include: In the event of poor installation, over time the seals between your windows can be worn down, allowing water to get in. Changes in temperature extreme temperatures can cause water to form, such as when you crank up the heating in the winter months and blasting the air conditioning in summer. Water leaks. If you have a leaky pipe or roof, moisture can build up and cause double-glazing mist. It is tempting for you to try DIY solutions to your double-glazed windows. However, the most effective method to stop condensation and moisture from occurring is to maintain them regularly and replace them with sealed units. If your double-glazed windows are still within their warranty, it is worth speaking with the installers because they will be able to fix the issue for no cost in accordance with the terms of the warranty. If the windows are out of warranty, it might be worth replacing them with new units to avoid the cost of replacement in the future. |
