![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
|
Autowatch Ghost II Immobiliser Installation Ghost immobilisers are a recent advancement in vehicle security. They are revolutionary in that they safeguard your vehicle from key cloning and hacking. The system uses a unique disarm sequence, requiring the correct PIN code to begin your vehicle. This is accomplished by pressing the buttons on the dashboard or steering wheel. TASSA Approved The new TASSA-verified Ghost-II CAN from Autowatch is an innovative device designed to combat the latest car crime trends including key cloning, hacking, and other forms of theft. This smart system connects directly to the CAN network of your vehicle, and prevents it from being turned on or driven without the right code. The system is completely undetectable and doesn't utilize radio frequencies or a key fob, instead it lets you create an individual PIN sequence using the buttons on your vehicle, like those on your dashboard or steering wheel, which you can change at anytime. You can design the PIN up to 20 presses long to ensure maximum security and a secure emergency code is available too. The system communicates with the vehicle's CAN data network to detect when the PIN is entered. This is then sent to the vehicle that disables the ignition and engine, as well as shutting off crucial components such as the starter motor and fuel pump. The system also offers the option of a "valet mode" that allows you to turn off the system and prevent your vehicle from being driven by valets or service center personnel who do not have the correct key. In contrast to traditional immobiliser relays that can be deactivated using readily available diagnostic tools for professionals, the Ghost device uses the onboard data network to communicate with the ECU and cannot be tampered with. It's a sealed unit and therefore, it is impossible to monitor the circuits. This makes it nearly impossible for thieves to hear that tell-tale clicking sound that traditional immobiliser relays produce. This technology is also not susceptible to jamming devices used by high-tech thieves, and because it is based on the CAN data network it's also not detectable by other diagnostic tools. This means it's a perfect anti-theft tool for any modern vehicle. We'll come to your office or home to perform the installation once you've booked the installation. We will walk you through the full demonstration with you, and provide you with the owner's manual, emergency cards, two Autowatch window stickers and an installation certification. Insurance Approved The Ghost is a security gadget installed aftermarket that protects against the types of thieves interested in stealing vehicles. It prevents your engine from being started until a specific sequence of buttons is activated. The only person who knows this sequence is you. If your car is stolen, thieves won't be able start it and leave your car alone in fear. Ghosts can be found in a silent mode that shuts down the vehicle when not being used. It can be turned off by pressing a button. The system is fully TASSA (Tracker and Aftermarket security systems association) insurance-approved, which means it is recognized by some insurers as an additional security measure for your vehicle. It can be utilized alongside other Thatcham-approved security measures, including trackers to help protect your vehicle from being stolen. This gives you security. In addition to this, the system communicates with your vehicles ECU using the CAN data circuit, which makes it undetectable to diagnostic tools and completely quiet. This means a thief cannot simply add a new key or change the ECU to bypass the Ghost. The system will only start your car if you enter the correct pin code. This unique PIN is only known to you and can be changed at anytime. The Ghost is a subtle immobiliser that is added to the majority of vehicles without wiring or installing aftermarket key fobs. It is directly connected to the vehicle's data network CAN and a personalised PIN code of your preference is programmed in it using existing buttons on the steering wheel and dashboard. This code will stop the vehicle from starting until the correct sequence has been selected first. If the code is guessable there are emergency codes which can be reset with your mobile phone. There is an app that can be used on iOS and Android to decrease the need to enter pins every time, providing more security. The shrewd An immobiliser, unlike a GPS tracker, which only aids you find your car after it's taken away, can stop the vehicle from ever being stolen in the first instance. This is accomplished by preventing the engine from starting until the correct code is retrieved from the key fob or via an app downloaded to the smartphone. https://notes.io/whjC9 is a fantastic way to stop wheel-jacking and other forms of theft because the person who is stealing is forced to leave the vehicle alone or risk being taken into custody. The ghost immobiliser is a weatherproof tiny device that fits inside the wiring harness of your vehicle. It connects to the CAN data network, and is hidden so that thieves cannot find it or disable it with simple wire cutting. The system is equipped with a service-mode that can be set to permit your garage to work on your vehicle without needing to know the password. Once the device has been installed in your vehicle, it can be disarmed and then armed with an app on your smartphone. You can even alter the PIN code at any time to ensure that only you have access to your vehicle. This is beneficial in the event that you intend to sell your vehicle in the near future, as it will increase the resale price. Another advantage of the Ghost immobiliser is that it's discreet and won't leave any marks on the car's body making it a perfect addition to any vehicle. It's easy to install, it's quiet and won't disrupt any other systems in your car. Many people are now putting more importance on the appearance of their vehicles So having a discrete immobiliser can enhance the look and feel of your vehicle. This can be especially appealing for those who regularly utilize their vehicles to transport valuable items, since it can deter any potential thieves from pursuing them. A ghost immobiliser will work alongside any other anti-theft device, such as a tracker to provide unrivalled security for your vehicle. Low Maintenance Ghost immobilisers work by connecting directly to the CAN data network. They are almost unnoticeable, since they do not use LED indicators or additional key fobs. It does not emit radio signals, and it's silent, meaning that thieves won't detect it. This device can be placed in many places (even under floor mats) and is a great option for those who want to secure their vehicle, without sacrificing its aesthetics. This device prevents your car from starting until you enter an individual password to you. This is accomplished by a combination of buttons on your dashboard and the steering wheel in a certain sequence. This will prevent thieves from hacking into your system and prevent them from starting your vehicle.
The Ghost remains in service mode until you switch it back into "service" which is activated by pressing the same combination of buttons as you did to arm it, (this is possible when you go to your dealer to perform maintenance or warranty work). This is to prevent it from being removed by unauthorised persons and to ensure it's fully armed whenever it is needed. It is also possible to transfer your Ghost to a new vehicle if you change vehicles throughout the time of ownership, if the new vehicle is compatible with. The latest Ghost comes with QR finger prints that are linked to the International Security Register. This means that if you have your Ghost stolen to replace parts, it will be traced back to you and your vehicle. This could deter criminals from stealing vehicles fitted with Ghost because they know that they are safe and could be caught and detained. |
