![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
|
Tilt and Slide Patio Door Repairs A well-functioning tilt and slide patio door provides light, fresh air and a smooth transition between indoors and out. Modern aluminium doors offer strength and durability and thermal stability, as well as an array of glass options to suit a wide range of aesthetics. Dirty tracks and rollers are the primary cause of sliding door problems. Regularly cleaning and lubricating the moving parts can keep your sliding door in good working order. Track and Roller Replacement The track and rollers are crucial for sliding doors to function. They are located in the bottom of the door's aluminum panel and rest on a raised track that allows them to slide open and close. Over time, dirt could cause the tracks to become blocked and cause the rollers to become damaged. Keep your patio door lubricated and clean to avoid these issues. If your track isn't severely bent, it's possible to fix the track and rollers, without taking the door off. Recruit a friend and then tilt the panel towards you to lift it off the track at the bottom (Photo 3). It may take some effort since the panels are heavy. Once the panel has been removed, lay it flat on sawhorses to inspect the rollers. Replace them if they are damaged by purchasing a new set. You can adjust the height of the rollers by turning the adjustment screws which are usually located in slots on the edges of the panel. If the rollers are in good working order they might require to be cleaned or lubricated. Use a screwdriver to remove the rollers, then wipe each one with denatured alcohol. This will remove any grime or dirt that might be causing the resistance. Then, carefully position each roller back into its slot and completely retract it by using the adjustment screw. Last but not least spray the rollers with silicone spray. This type of lubricant won't accumulate dirt like petroleum-based products and will help your door move effortlessly. After cleaning the rollers and installing them, you can reinstall the door and test it to make sure the track is in alignment with the rollers and the doors are sliding smoothly. If you experience any other problems, contact an expert in your area for assistance. Keep your doors clean and lubricated to prolong their lifespan and decrease the need to repair. We recommend a silicone-based lubricant because it doesn't draw dirt in the same way that WD-40 does. It is recommended to apply lubrication to your rollers and tracks at least once a month. Insect Screen Replacement Sliding patio doors are great for maximizing the floor space, allowing airflow while allowing panoramic views. However, they can become problematic if their mechanism stops working or is not functioning correctly. Luckily, most problems with sliding screen doors can be easily fixed. Dirty rollers caused by debris in the track or a wrinkly screen are the most common causes, but you can usually fix them by following these easy steps.
Choose a screen that's at least 2 inches larger in both directions than the opening of the frame. You'll be able to trim any excess. Then you can use a spline roll tool to push the rubber spline end into the channel. Once you have done this, it is time to add the rest of your spline. Adjusting the Panel The tilt and slide mechanism lets you widen the patio doors for ventilation and keeps your pets, children and other household members away. The doors require more force to open than you think. In time, this can lead to an increase in friction and crooked tracks, or misalignments, which could make the door not work. A quick detection and minor adjustments are often able to solve these issues, and reduce the cost of replacing hardware. The first step in adjusting a tilt and slide patio door is to remove the panel and set it on a flat surface. After the panels have been removed using a screwdriver, remove the plastic hole caps from each of the adjuster rollers. Once they are removed, the adjuster will be coaxed out of its channel by using an extended shaft screwdriver. After removing the roller clean it with denatured or rubbing alcohol. This will get rid of any dirt that has caused the roller to squeeze and allow it to retract into its channel after the process. When reinstalling an movable panel align it with the frame and use the drill to drive the screws through the flange. The flange must be securely secured to the edge of the door while ensuring the flaps are properly positioned. When the movable panel is in place, apply a bead of silicone-based lubricant to the top track arm connector block, the lead Bogie wheel, and the slave Bogie wheel, and then replace the plastic cap on the hole. Repeat the procedure for the other two panels that can be moved to restore their slide functionality. Install the plastic flanges. Utilizing a plastic adhesive glue the jamb-side strip onto its fixed panel. Reattach the handle once the glue is dry and test the smoothness of the process. If you find any issues, adjust the lead Bogie wheel by getting it removed from its channel, cleaning it and then reinstalling it using a bit of silicone-based grease. Charley Bar Installation A patio door can be a practical option to let your pet in and out of the house, but it can also be a entry point for burglars. You can enhance the security of your patio door by installing a pin lock or an charley bar. These devices offer a mix of security, convenience, and ease that is unparalleled in the market. The charley bar is an excellent option for your sliding glass door, and can be installed easily at your home. The charley bar can be installed in the center of your door, and it prevents the patio door from being jimmied open by tools or other items, like a broom or hockey stick handle. The charley bars are constructed of polycarbonate injection-molded tubes and extruded RPVC tubing that telescoping, making them strong and durable. To install the charley bar first verify that it's the right length for your door by measuring horizontally from the edge of the track for sliding doors to the sliding glass patio door. Mark the points using an eraser where the bars will be erected. Make use of an eighth-inch tool to drill holes into the wall jambs and frame of the patio doors Be careful not to scratch the glass of the patio doors. Then, tighten the screws that came with the charcoal bars. The charley bars are a great choice for sliding glass patio doors or sash windows. This simple security device will keep your patio sliding doors secure and burglar-proof for a long time to come. It is constructed of injection-molded polycarbonate that has been tested to withstand over 400 pounds of pressure by Intertek. The charley bar is also lockable with the included key. It is easy-to-install and stays out of the way when it's not in use. You can buy a charley bar from most hardware stores. If you're looking for a charley-bar that is functional, purchase it from an online retailer. |
