Why Should You Have a Ghost Immobiliser Installed?

Autowatch Ghost is the next-generation vehicle immobiliser. It safeguards your vehicle from theft. It works discretely by connecting to a vehicle's CAN network, and requires that a unique, reversible PIN sequence be entered in order to start the vehicle.

The system is quiet, has no LED indications, and is not detected by diagnostic tools. It is also TASSA-approved and recognized by certain insurance companies.

No Key Fobs, LED Indicators

Ghost immobilisers is a groundbreaking innovation in car security, can prevent thieves from driving even if they have access to your vehicle. It connects to the onboard CAN data circuit of your vehicle and communicates quietly, so there are no radio signals or key fobs required, making it difficult for a thief to bypass it. It is also unrecognizable by diagnostics, and doesn't have an indicator light that would reveal its location. This makes it a great choice for expensive or rare cars, like classic automobiles.

Autowatch Ghost is an extremely small device that can be hidden within the vehicle's loom. This makes it nearly impossible for thieves or other intruders to detect it. The device connects to the CAN system, and connects to the ECU (Engine Control Unit) to deter theft. It is incredibly easy to install and can be installed in less than an hour. It's also less intrusive than other physical security devices, like steering wheel locks.

The device is based on the same technology as GPS trackers, however it stops theft by stopping the vehicle from starting. It makes use of buttons on your vehicle to create a unique and reversible PIN code sequence that needs to be entered before you can drive your vehicle. The device can be programmed to use obscure buttons, such as the ones on the back of the rear demister to make it more difficult for thieves to figure out the PIN. This kind of technology is becoming increasingly popular, and a lot of insurance companies are now requiring it on cars equipped with keys-less entry systems.

The Ghost also prevents key cloning and hacking. The device is connected to the vehicle's CAN bus and utilizes the buttons to generate a unique code that can be altered. The code has to be entered to start the car. The device cannot be defeated by modifying the ECU or by introducing new key fobs. Instead, the criminal will require a special device to disable the immobiliser.

The cost of the ghost immobiliser is affordable, and it can be combined with an GPS tracker to ensure your vehicle's safety. It's a great choice for older vehicles and can save you money on insurance premiums. If you're considering an immobiliser that ghosts, call us at Trackershop for an estimate. We will include the installation in the price to ensure that you feel secure about the security of your vehicle.

It is TASSA Approved

Immobilisers are the best way to secure your car. It can disable features such as the starter motor or fuel pump in the event that the PIN code was not entered correctly. It is essential to install an immobiliser by an expert. Installers should be TASSA-approved, as this will ensure that the product is safe to use and operates properly. The process involves examining the credentials of the installer, including criminal background checks and identity verification.

img width="473" src="https://www.thekeylab.co.uk/wp-content/uploads/2022/07/IMG_8350-e1658703091493-768x951.jpeg">
The Ghost immobiliser has been designed to stop thieves from stealing cars. It is directly connected to the CAN data network of your vehicle and doesn't require additional fobs or alarm systems. The system is quiet and isn't detected by car trackers or thief. The system uses buttons on the steering wheel or door panels, as well as the central consoles to generate a unique PIN code. The correct sequence needs to be entered to start your car, making it extremely difficult for thieves to break.

This innovative immobiliser has been approved by TASSA and can be installed at Trackershop. They are experts in the installation of this device. It also provides other security products, such as remote starters and a tracking device that prevents theft. The company's team of technicians is fully mobile, and they can install the device at workplace or at your home.

It is crucial to safeguard your vehicle, since more and more vehicles are stolen without keys from the owners. Modern vehicles that are keyless are particularly vulnerable because it is simple to buy cloning equipment and door lock pick sets over the internet. An Autowatch Ghost can assist to keep this from happening as it isn't able to be detected by thieves or tracked by the vehicle tracker.

The Ghost II CAN immobiliser is completely hidden and cannot be tampered with by thieves. It can detect attempts to tamper with the ECU and will shut down the parts of the engine in order to deactivate the immobiliser. In addition, it can even deactivate the car alarm to prevent the attention of thieves and allow them to escape from the vehicle.

It is reversible

The Ghost immobiliser is a completely adjustable security system that can be installed and removed at any time. It is directly connected to your vehicle's CAN (Controller Area Network) and offers protection via a unique PIN code with a private sequence that only you will know. If the PIN code has been entered correctly, the vehicle will not start and thieves are discouraged from attempting to steal it.

The installation of the Ghost is non-invasive, and your vehicle's warranty will not be affected. The system is also compatible with any other aftermarket alarm or tracker you may have installed. Furthermore, it does not leave any trace on the exterior or interior of your vehicle. It's not visible to thieves since it does NOT use key fobs or LED indicators.

Gangs of organized car thieves are currently using devices to detect circuit wires on vehicles, however the Ghost Immobiliser does not use any of these methods. It makes use of buttons on the dashboard or steering wheel to create an individual PIN code. This code will have to be entered to start the car.

The Ghost Immobiliser can also safeguard your vehicle against OBD port hacking. This method of theft has become more common, and it is one of the most difficult methods to stop. The Ghost Immobiliser can help prevent these thefts by stopping the criminal from connecting an electronic device to your vehicle's OBD port and cloning your keys.

The Ghost can be used conjunction with a vehicle tracking device. This can be extremely useful for locating your car after it was taken. However, it isn't recommended to use a tracker as your primary security measure against theft since they don't stop the theft by itself. They are also more easily to detect and remove than the Ghost immobiliser.

Easy to install

A Ghost immobiliser, a groundbreaking new technology, can help you safeguard your vehicle from theft. It connects to the CAN (Controller Area Network) which is a system inside your vehicle, and generates a unique code that thieves can't crack. It's a low-cost and highly effective method of protecting your car from being taken.

Ghost is designed to work with all vehicles and models, including those with aftermarket key fobs. The device uses the buttons on the dashboard, steering wheel, and central console to generate an individual PIN code sequence that stops thieves from starting your car. It also has a variety of other features, including a GPS tracker that locates your vehicle.

This type of device is a very popular option for drivers as it offers protection against a variety of kinds of car theft. It is easy-to-install, silent, and does not use radio signals. https://www.thekeylab.co.uk/car-security-ghost-immobiliser/ 's also a good option for those who do not want to buy a complete alarm system. It is, however, essential to get a professional to install the product to ensure that it works correctly.

It is essential that you have an expert install your ghost immobiliser to ensure that it functions just as it should. A professional will know the best place to place it and ensure that the device is connected to the electronic system in your vehicle. The installer will also make sure that the device is kept from view and isn't seen by anyone who doesn't have an underlying reason to know about it.

The Autowatch Ghost II can be set to the Valet/Service mode which allows you to drive at 30 mph without having to use access keys. This makes it ideal for valet parking as well as transporting your vehicle. This mode can be utilized even if your vehicle is being repaired by a dealer. This mode can be disabled by the companion app and then reset after each usage.

The Ghost is the only aftermarket CAN bus immobiliser that does not require cutting wires. It connects directly to the onboard CAN system of your vehicle and is not detectable with tools for diagnosis or cloning. It is tamper proof silent, quiet, and doesn't emit any radio signals. It can be reversible so you can move it to a different vehicle if needed.


トップ   編集 凍結 差分 バックアップ 添付 複製 名前変更 リロード   新規 一覧 単語検索 最終更新   ヘルプ   最終更新のRSS
Last-modified: 2024-05-04 (土) 06:48:04 (17d)