kromanndupont394362

Add a Sparkle to Your Fiat 500 Key Fob

These cute Silicone Covers will add a touch of fun to your Fiat 500 Key fob. They are easy to install and snap into place of the original black cover.

The silicone covers protect the keys from splashes, dust and other contaminants. The silicone covers also make your keys look more stylish. The signals of the remote control are not affected and continue to work even when the cover is in place.

Guards your key from splashes and dust

Add a touch of style to your key by using this silicone cover. It is perfectly positioned around the key fob without sliding. It also protects your key from splashes and dust. The cover's silicone material will not affect the signals that are sent by your key remote, and you can use your key fob's buttons as usual.

Accessorize your Fiat 500 with these funky covers in Grey and Black. They're perfect if the original key cover has begun to look scruffy, dented or scratched. The covers are made of premium silicone and come with two key rings, so you can swap them out when you're bored of the same color.

These covers are designed to replace the black key cover that comes with your vehicle. It is necessary to remove the original key cover before you can install these covers.

Great look!

Fiat is a distinctive and famous Italian brand and their cars sport an incredible style that distinguishes them from the crowd. These stylish car key covers are a simple and fun option to add a touch of sparkle to your keys without being too overpowering. They look fantastic on the key fob and really freshen up a worn out one.

The covers snap in the desired position and are designed to replace your original black cover. It is a good idea to take off the old cover prior installing the new.

They are available in Grey and black and the fiat logo is affixed to both. If you change your decision, you're able to change the color! These are also great gifts for Fiat 500 drivers.

Easy to install

Fiat 500 key covers are an easy way to freshen your car keys. They come in a variety of styles and colors so you'll be able to find the perfect one to match your personal style. The most appealing aspect is that they're simple to install, meaning you can put them in place in less than ten minutes. You will require a screwdriver, as well as some patience. https://www.g28carkeys.co.uk/fiat-car-key-replacements-near-me/ is to take off the original cover from your key. The original cover needs to be removed before the replacement is able to be installed.

After removing the old cover, use a flathead screwdriver in order to pry out the four major attachment clips located on the passenger side of the fob assembly. They are marked with red on the image below. Pay attention to the yellow tabs that have to be removed.

Replace the old battery with a #CR2032 coin cell battery. Make sure that the "+" positive side of the battery is pointing to the opening of the fob and that the"-" negative side is facing the buttons made of rubber.

Reattach the passenger side mirror cover by aligning the tabs that locate it. Once you've completed this, put the driver side fob back in your car and test it by pressing the button on the front of the car key. If everything is functioning properly the car should turn on the parking lights, and the doors will lock automatically.

Easy to remove

Fiat 500 Key Covers are a great way to update your key fob. They're easy to put on and offer a unique look. They also shield your key fob from scratches and smudges. However, before you can fit a new key cover you must remove the original cover from your vehicle.

You can easily do this by pressing the "Fiat" red button on the front of your key fob. Pressing the button will open the lever that allows you to slide out the switch for ignition on your key (1). After removing the key, you will be able to see a small silver round switch that has images of a locked and unlocked padlock next to it. This is the battery switch on the key fob. It is easy to replace the battery by turning the switch one quarter turn using the small screwdriver flathead.

The key fob has a microchip inside that is used to communicate with the Body Control Module (BCM). When you insert your Fiat key, it presses the button on the ignition switch. This is used to remind you of the "key-inignition". The BCM will then be capable of reading the transponder inside the key fob, and verify that it's valid.

You can also add the sport design twin pack for a unique and fun style to your key covers. These covers snap on over the original cover. They are available in Cream and silver. The key cover will only work when the original black cover is removed from your key fob.

img width="404" src="">