iqbalcreech850412

Add a Sparkle to Your Fiat 500 Key Fob

Add a touch of fun to your Fiat 500 Key Fob using these adorable Silicone Covers. They're simple to install and snap on in place of the original black cover.

The silicone covers shield the car keys from dust, splashes and other contaminates. They also make your key look more stylish. The signals generated by the key remote control are not hindered and can be used even with the cover on.

Keep your keys safe from dust, splashes and other contaminants

This silicone cover will add a touch of class to your key. It perfectly fits around the key fob, without slipping. It shields your key from dust and splashes. The signals generated by your key remote control will not be affected by the silicone cover therefore you can use the buttons on your key fob as normal.

Accessorize your Fiat 500 with these funky covers in Grey and Black. They're perfect if the original key cover has begun to appear shabby, scratched or scratched. The covers are made from premium silicone and come with two key rings so you can switch them out when you get bored of the same color.

These covers are designed to replace the stock black key cover that came with your vehicle. These covers will not fit if you already have the original key cover.

Great look!

Fiat is an exclusive and renowned Italian brand and their cars have an incredible design which makes them stand out from the rest of the pack. These dazzling key covers are a fun and easy method to add a dash of glamour to your car keys without being overbearing. They look great on your key fob, and can be used to revive an old one.

The covers are designed to replace the original black cover and they snap into place with ease. It is recommended to remove the previous cover prior to installing this.

They come in Grey as well as black. The fiat logo is affixed to both. You can always change it if you decide to! These are also great gifts for Fiat 500 drivers.

Easy to install

Fiat 500 key covers can be a great method to make your keys more modern. You can choose from a variety of colors and styles to find one that best suits your personal preferences. Installing them yourself is within ten minutes. You'll only need an screwdriver and some time. The first step is to take off the original cover. The original cover needs to be removed before the replacement is able to be installed.

After you have removed the cover, you can use a flathead for prying the four main attachment clips off the passenger side of the fob assembly. These are highlighted in red on the picture below. Also note the locating tab slots in yellow that need to be disconnected in addition.

img width="455" src="">
After taking the battery off, replace it with a brand new # CR2032 3 volt coin cell battery. Make sure that the "+" positive side of the battery corresponds to the opening in the fob, and that the -" negative side is facing toward the buttons made of rubber.

Attach the cover for the passenger side mirror by aligning the locating tabs. Once you have done this, place the driver side fob back in your vehicle and test it by pressing the button on the front of the car key. If everything is working properly your car will turn on the parking lights and your doors will lock automatically.

Easy to remove

Fiat 500 Key Covers are a great way to update your key fob. They are easy to install and have a distinctive look. They also shield your key fob from smudges and scratches. However, before you can fit a new key cover it is necessary to remove the original cover from your vehicle.

It is easy to accomplish this by pressing the "Fiat" red button on the front face of your key fob. After pressing the button an unlatching lever will be released that lets you slide out the ignition switch made of steel (1). After you've removed the metal keys, you will find an unassuming silver metal switch that has images of a padlock that are locked and unlocked beside it. This is the key fob battery switch. https://www.g28carkeys.co.uk/fiat-car-key-replacements-near-me/ is simple to replace by turning the switch a quarter turn with a screwdriver that has a flathead.

The key fob has a microchip inside that is used to communicate with the Body Control Module (BCM). When you insert the key in your Fiat car, it presses the ignition switch, which serves as an "key-in-ignition" reminder. The BCM will detect the transponder in the key fob to verify that it's a valid key.

You can also choose to add the twin pack with a sport design to give a unique, fun look to your key covers. These covers snap over the original cover. They are available in Cream or silver. The key cover can only be used only if the original black cover is removed from your key fob.