![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
https://www.openlearning.com/u/duketaylor-sd6iwb/blog/WhatIsPatioDoorLockRepairNearMeAndWhyIsEveryoneDissingIt and Slide Patio Door Repairs A tilt and slide patio doors that is well-designed to bring fresh air and light into the home and allows for easy moving from indoors to outdoor. Modern aluminium doors offer strength and durability along with thermal stability and a variety of glass options to suit various aesthetics. Dirty tracks and rollers are the main reason for sliding door issues. Regularly cleaning and lubricating the moving parts can help keep your sliding door in good working order. Track and Roller Replacement Tracks and rollers are the main elements of sliding door functionality. They are housed in the bottom of the aluminum door panel and are mounted on a track that helps them slide open and close. Over time, dirt can cause the tracks to become clogged and cause the rollers to be damaged. Keeping your patio door clean and well-lubricated will help avoid these problems. If your track isn't severely bent, it's usually possible to fix the track and rollers without removal of the door. You can ask a relative to assist you in lifting the panel off the track by bending it towards you (Photo 3). It may take some effort because the panels can be quite heavy. Once the panel is removed, lay it flat on the sawhorses to examine the rollers. Replace them if damaged by purchasing a new set. You can also alter the height of the rollers by turning the adjustment screwsusually located in slots along the edges of the door panel. If the rollers are in good shape, they may simply need to be cleaned or lubricated. Take the rollers off with the help of a screwdriver, and then clean them with denatured ethanol. This will remove any caked-on dirt and grime that could be causing resistance. Then, carefully position each roller back into its slot and fully retract it by using the adjustment screw. Then, last but not least spray the rollers using silicone spray. This kind of lubricant will not retain dirt as petroleum-based products do and will help your door move smoothly. After cleaning and reinstalling the rollers, you can reinstall and test the door to make sure the track is aligned properly with the rollers. Also, ensure that the doors move smoothly. Contact a local dealer if you need assistance. Keep your doors clean and lubricated to prolong their life and decrease the need for repair. We recommend a lubricant made of silicone because it doesn't draw dirt as WD-40. It is recommended to grease your rollers and tracks at least once a month. Insect Screen Replacement The sliding patio doors are a great way to maximize floor space, provide airflow, and provide stunning panoramic views. They can however become problematic if the mechanism is not functioning properly or has stopped moving altogether. Fortunately, the majority of issues with sliding screen doors are easily solved. Dirty rollers due to debris in the track or a wrinkled screen are the most common causes, but you can usually repair them by following these easy steps. If your screen is sliding or wrinkled, you must first lay the frame down on an unfinished work surface. Then place a 1x4 board under each end to put some slight bows in the middle. This will allow you to pull the screen tightly and straighten it. Be sure to buy a replacement screen that is at least a couple of inches bigger than the frame openings in both directions. You'll be able cut any excess. Then you can use a spline roll tool to press the rubber spline end into the channel. Once you've done this, it's time to push the rest of the spline. Adjusting the Panel In contrast to traditional sliding doors that open by turning the handle tilt and slide patio door mechanisms allow you to keep the doors open for ventilation while keeping your children and pets out of your living space. Despite the convenience of this system, they tend to require more force than expected and, over time, this leads to more friction, crooked tracks or misalignments that can cause the door to fail. Early detection and minor adjustments can usually solve these problems, reducing the cost of replacement hardware. The first step to adjust the tilt and slide patio door is to take off the panel and place it on a flat surface. After removing the panels, make use of a screwdriver to remove the plastic caps from the holes of each adjustment roller. Once the plastic hole caps are removed, make use of a long-shafted screwdriver to pull the adjuster out of its channel. After removing the adjuster, clean it with denatured or ruby alcohol. This will eliminate any dirt that causes the roller to squeeze and let it easily retract back into its channel following the process. When reinstalling a movable panel align it with the frame and then use the drill to drive the screws along the flange. The flange should be secured tightly to the door's edge while making sure that the flaps align correctly. Once the movable panels have been put in place, apply silicone-based lubricant on the top track block connectors for the arm as well as the lead Bogie wheels and the slave Bogie wheels and then replace the cap on the hole made of plastic. Repeat the process on two additional movable panels to restore slide functionality and reinstall the flanges made of plastic. With a plastic adhesive, attach the jamb-side strip to the fixed panel. Reattach the handle once the glue has dried and examine the smoothness of the process. If the issue is not resolved you can adjust the lead Bogie by removing it and cleaning it before replacing it with a silicone-based oil. Charley Bar Installation A patio door can be a practical option to let your pet in and out of the house, but it can also be an easy point of entry for burglars. Add a pin lock to your patio door, or a charley-bar for added security. These devices provide a mix of convenience and security that is unparalleled by any other product on the market.
To install the charley bar, first ensure that it's the right length for your door by measuring horizontally from the edge of the sliding door track to the sliding glass patio door. Then, you can mark the points where the charley bars will go using a pencil. Use an eighth-inch drill bit to make holes in the wall jamb and the frame of the patio door Be careful not to penetrate the glass of the patio door. Then, tighten the screws that came with the bar charley. The charcoal bars are a great choice for sliding glass patio doors or sash windows. This simple security gadget will keep your sliding patio doors safe from burglars and tampering for a long time to be. It is made of polycarbonate that has been injected and has been tested by Intertek to withstand more than 400 pounds of pressure. The charley bar is lockable with the included key. It is easy-to-install and hangs out of the way when not in use. The majority of hardware stores sell a charley bar. If you'd like to purchase one that will perform, consider buying a charley bar from an online retailer. |
