![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
|
Sliding Patio Door Repair and Replacement A sliding patio door is a great addition for any home. They are easy to operate and offer a wide view. Like any other household door they are prone to wear that requires replacement or repair. Keep your sliding patio doors in working order by cleaning and lubricating them frequently. Lubricating them with silicone spray or graphite allows them to slide smoothly, thus prolonging their life span. Roller Replacement If you notice that your sliding patio door doesn't move easily, it could require lubrication. If the rollers are damaged or worn it is necessary to replace them. Replacing your patio door's rollers will let your doors operate smoothly and lessen the amount of force required to open or close them. If your patio door is older, it may be necessary to cut off the bottom portion of the frame in order to access the rollers. If this is the case then use a mallet made of rubber and a block of wood to tap the assembly loose and then take it off. Make sure you save the roller screws to use when reinstalling your new rollers. Sliding glass door are a significant security feature in many homes, and should be properly protected. In addition to making it difficult to open or close your door, damaged or old roller wheels can leave gaps that could be exploited by intruders. Replacing your patio door rollers ensures that your home is well-protected from unwanted guests. After removing the bottom and top rails It is a good idea to clean all the areas of the track using an alcohol-soaked cloth. This will remove any dirt and make getting rid of the doors from the tracks much simpler. The drainage holes on the bottom of the track should be visible but they are usually clogged by dirt. If your track seems to be prone of collecting lots of dirt, you might think about installing an stainless steel u-shaped piece that snaps onto the track and creates an additional channel for water to flow through. These are available from CR Laurence, as well as other retailers who specialize in sliding door parts. Remember to install the first panel before installing the top panel. Once the doors are back in place, you should be able to verify that they are able to move freely and do not require any excessive force to open or close them. If they still feel rough, you can adjust the new rollers to give them more clearance. Weather Stripping Replacement The weather strip on your sliding door's seals slowly wear away, letting in drafts and moisture that raise your energy costs. It's an easy and simple task that can save you money on heating bills. Weather stripping for sliding doors is available in a range of materials, each having its own advantages and drawbacks. It is important to select one that can be able to withstand friction, weather changes temperatures, extreme temperature fluctuations and foot traffic, without interfering with the door's operation. Foam and felt, for example, are inexpensive but vulnerable to weather and visible inside the frame Vinyl is more costly but will last for many years while metals are strong however they may not look in an upscale home; while plastic or rubber can erode over time and need regular replacement. To install new weather stripping, you must first remove the door from its casing. Find the headstop on the top of the doors It's usually small pieces of plastic or metal that is held in place with screws. Remove the screw caps, then use a screwdriver that is flat to pull the headstop free from the bottom of the door. Remove the old weatherstripping as well as any remaining debris using scraper or a putty blade. Do not try to remove the door off its tracks using just one person. You'll need to use plenty of force. Instead, you should have a second person hold the door steady while you remove it from its frame. Find the channels that hold your weather stripping. Plugs that are in line with the color of your doors are best placed in these channels. Take the plugs off, then pull the weather stripping to disconnect it from the channel. Fin Seal is the best kind of weather stripping for sliding patio doors. This kind of weather stripping features a Mylar fin centered in the pile (brush material) and is very robust, suitable for almost all climates and stands well against foot traffic. The back of the stripping is made of a flexible, hard material that is able to withstand the rigors a sliding patio doors. Door Alignment Sliding patio door are a great addition to any home. However, like all other things, they will require adjustments periodically to ensure that they perform at their best. As time passes, sliding patio doors can be worn out or out of alignment. This can cause issues such as sticking, bumping against frames, and not locking properly. https://www.repairmywindowsanddoors.co.uk/patio-door-repairs-nottingham/ and minor adjustments will stop these issues, saving you both time and money. One of the main causes of sliding door misalignment is damage to tracks or rollers due to sudden jolts or force. A quick fix using the right tools can fix this issue, keeping your patio door moving smoothly for many years to come. Other reasons for misalignment are changes in humidity or temperature or weatherstripping wear and tear, and inadequate installation. The latter can result in parts shifting and becoming loose over time, causing the door to move but not latch properly or close. These changes over time could result in air drafts and water leakage into the house. To prevent these problems, it is important to regularly clean and lubricate your patio door track. A small amount of spray-lubricant can easily be purchased at any hardware retailer and application often with a small amount of brush can keep the track running smooth. Another common cause for misalignment of sliding patio doors is the latch hook that does not match the strike plate on jamb. To fix this issue, first open the door to expose the latch mechanism, and give you complete access to it. Locate the adjusting screw for this latch hook and gently turn it in either direction to adjust its length. A properly adjusted latch hook will guarantee that the latch hits and engages with the strike plate without any resistance or obstruction. Once you've made the necessary adjustments, test your door to ensure it locks and slides properly. If there are any issues, you can repeat the procedure until your sliding patio door is fully functioning. You can save a lot of cash by not paying a professional to do expensive repairs. Frame Replacement Over time, screws on sliding door frames can loosen. This allows the frame to move small amount. By regularly tightening and checking these screws, you can prevent your doors from getting stuck or jammed. A sagging screen door could be corrected with a little some clamping, but hinges that are loose may require an upgrade. It is possible to upgrade the patio's sliding feature without having to replace the frame, however, you must first evaluate the condition of your current frame. This approach is more cost-effective than a complete replacement of the frame and can address particular needs like better insulation or a new design. A complete frame replacement requires the complete removal of all hinged doors frames, windows and doors from the wall opening. This allows for a new sliding patio door to be put in and will allow for more flexibility in design size, material and design. Sliding glass doors are designed to give you a beautiful view of your backyard, but in time, they begin to show signs of wear and tear. If your sliding glass doors are difficult to open or stuck you may need to replace the track or wheels. If the frame is in good condition, it may be enough to replace the doors. Make sure that your workspace is free of obstructions, and that you have laid down a dropcloth. Next, lay the sliding door on a flat work surface and remove any removable grilles or shades from the frame. Then you can use a screwdriver to remove the plugs that are covering the roller adjustment screws at the bottom of the frame (they're typically covered with caps). After these have been removed then you can unlatch and remove the door's bottom from the track.
|
