![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
Tilt and Slide Patio Door Repairs A well-functioning tilt and slide patio door brings fresh air, light and a smooth transition between indoors and outdoor. Modern aluminum doors offer durability and strength, thermal integrity and a variety of glass options for various aesthetics. One of the most frequent problems for sliding doors is dirty tracks and rollers. Cleaning and regular lubrication of these moving parts can ensure that your door functions properly. Track and Roller Replacement Tracks and rollers are the main elements of sliding doors. They are located in the bottom of the aluminum door panel and are mounted on a track that allows them to slide open and closed. Over time, dirt in the tracks can cause them become blocked. This could lead to the rollers becoming damaged. Cleaning your patio door and well-lubricated can prevent these problems. It is possible to repair your rollers and track, unless the track is severely bent. Recruit a friend and then tilt the panel towards you to lift it off the bottom track (Photo 3). This may require some effort since the panels can be quite heavy. After removing the panel, lay it flat on sawhorses, then examine the rollers. If they're damaged, replace them with a brand new roller assembly. You can also alter the height of the rollers by turning adjustment screwsusually located in slots on the edge of the door panel. If the rollers are in good condition they might need to be cleaned or lubricated. Use a screwdriver to remove the rollers and wipe down each one with denatured alcohol. This will remove any dirt or grime that could be causing resistance. Then, carefully position each roller back into its slot and fully retract it using the adjustment screw. Then, last but not least spray the rollers with silicone spray. This type of lubricant won't accumulate dirt like petroleum-based products and will let your door move effortlessly. After cleaning and reinstalling the rollers you can reinstall and test the door to ensure that the track is properly aligned with the rollers. Also, ensure that the doors move smoothly. Contact a local dealer if need assistance. Maintaining your doors clean and well-lubricated will help them last longer and reduce the need for repairs. We recommend a lubricant made of silicone, as it will not draw dirt as WD-40. It is recommended to grease your tracks and rollers at least once per month. Insect Screen Replacement Sliding patio doors are great for maximising the floor space, allowing airflow and allowing in beautiful views. However, they can become troublesome if the mechanism stops functioning or isn't working correctly. Fortunately, most issues with sliding screen doors can be easily solved. Dirty rollers from debris in the track or a wrinkly screen are typical causes but you can fix them by following these easy steps. If your screen is sliding or wrinkling, you should first lay the frame down on a flat work surface and slip a 1x4 block under each end to create some slight bows in the middle. This will allow you to pull the screen tightly and straighten it. Buy a screen that's at least 2 inches larger in both directions than the opening of the frame. This way, you'll have enough room to trim any excess. Also, use a spline roller tool to push the rubber spline's edge into the channel. Once you have done this, it is time to roll in the rest of your spline. Adjusting the Panel The tilt and slide mechanism lets you open the patio doors more to allow for more ventilation while keeping your children, pets, and other household members out. The doors require more force to open than you would think. Over time it can lead to an increase in friction and uneven tracks, or misalignments, which can cause the door to not function as it should. The early detection of problems and minor adjustments can usually solve these issues, thereby reducing the cost of replacing hardware. The first step for adjusting a tilt-and-slide patio door is removing the panel. Set it on an uncluttered surface. After removing the panels, employ a screwdriver to take the plastic caps that are in the holes of each adjustment roller. Once the plastic caps are removed, you can use a long shafted screwdriver to coax the adjuster out of its channel. After removing the roller, clean it using denatured or ruby alcohol. This will eliminate any grit that is causing resistance and allow the roller to retract easily into its channel after the process is completed. <img width="328" src="https://www.repairmywindowsanddoors.co.uk/wp-content/uploads/2018/10/GLASS-REPLACEMENT-1140x304.jpg"> When you are reinstalling the moveable panel, align it with its frame and employ a drill to drive in the screws across the flange. Attach the flange securely to the door edge while ensuring that the flaps orient correctly. Once the movable panels have been put in place Apply silicone-based lubricant to the top track block for the arm connector as well as the lead Bogie wheels and the slave Bogie wheels and then replace the cap on the hole made of plastic. Repeat the process for the other two movable panels in order to restore their slide capabilities. Install the flanges made of plastic. Finally, attach the jamb side strip to its counterpart fixed panel using a glue made of plastic. When the glue is dry reconnect the handle and check for smooth operation. If there are any issues, you can adjust the lead Bogie wheel again by taking it out of its channel, cleaning and reinstalling it with a bead of silicone-based grease. Charley Bar Installation A patio door is an efficient way to let your pet into and out of your home, but it also serves as a point of easy entry for burglars. Install a pin lock on your patio door or a charley-bar to increase security. These devices provide a combination of security, convenience, and ease that is unparalleled on the market. The charley bar is an excellent option for sliding glass door, and can be easily installed at your home. The charley bar installs in the middle of your door and stops the patio door from being jimmied open by tools or other objects such as a broom or hockey stick handle. The charley bar is made of injection-molded polycarbonate, and extruded RPVC tubes that telescoping making it tough and durable. To install the charley bar, first make sure that it's the right length for your door by measuring horizontally from the edge of the sliding door track to the sliding glass patio door. Then, mark the points where the charley bar will be installed using pencil. Utilize http://netcallvoip.com/wiki/index.php?title=mckinneybegum0622 that is 8 inches to create the holes in the wall jamb and the frame of the patio door Be careful not to scratch the glass of the patio door. Then you can tighten the screws that came with the charcoal bars. The Charley bar is a great choice for your sliding glass patio doors and windows with sash. This simple security device will keep your sliding patio door safe and burglar proof for many years to come. It is made of polycarbonate that has been injected, and it has been tested by Intertek to withstand over 400 pounds of pressure. The charley bar can also be locked with the key included. It's easy to put it up and hangs out of the way when not in use. You can purchase a charley bar from most hardware stores. If you want a charley-bar that works, purchase it from an online retailer.
